Loading Staples in the Integrated Office Finisher (Optional)
33
Removing the Old Toner Cartridge
1.
Make sure that the machine is
not operating, and open the
front cover.
2.
Pull the toner cartridge out until
you can grasp the handle on top
of the cartridge.
3.
Hold the handle and remove the
cartridge from the machine.
NOTE: Be careful when handling the empty cartridge to avoid spilling any residue
toner.
Inserting the New Toner Cartridge
1.
Remove the new toner cartridge
from the box. Before removing
the cartridge from the bag,
shake it from side to side to
evenly distribute the toner
inside.
2.
Insert the cartridge as shown in
the illustration, and slide it into
the machine until it clicks.
3.
Close the front cover.
NOTE: If the front cover is not
completely closed, a message will
appear and the machine will not
operate.
Loading Staples in the Integrated Office Finisher (Optional)
The Integrated Office Finisher contains an automatic stapler. When the finisher runs
out of staples, a message appears on the touch screen. When this message is
displayed, load a new staple case into the staple cartridge.
