15 Problem Solving
426
062-790 The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter in the User Guide, to verify the types of documents
that can be copied.
071-210
071-211
An error occurred when Tray 1 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
072-210
072-211
An error occurred when Tray 2 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
073-210
073-211
An error occurred when Tray 3 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
074-210
074-211
An error occurred when Tray 4 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
077-211 An error occurred with the Two Tray Module or the High Capacity Tandem Tray.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
077-215 An error occurred when the Two Tray Module was used. Switch off the machine,
and then switch it on again. Contact the Xerox Welcome Center if the problem
persists.
078-210 An error occurred when Tray 1 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
078-211 An error occurred when Tray 2 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
078-212 An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
078-213
078-214
Tray 5 (Bypass) malfunctioned. Switch off the machine, and then switch it on
again. If the problem persists, contact the Xerox Welcome Center.
078-250 An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
081-799 The e-mail to fax job was cancelled. The fax destination may be incorrect.
Check the number, and try again.
112-700 The hole punch waste container is full. Empty the container.
For information on how to empty the hole punch waste container, refer to
Emptying the Hole Punch Waste Container (Optional) on page 37
.
116-220 The machine failed to move onto the Download mode. Contact the Xerox
Welcome Center.
116-392 The Printer or PostScript kit is attached to an improper slot on the controller
board. Attach the Printer or PostScript kit to the correct slot.
116-701 Unable to print double-sided due to insufficient memory. Check if memory is
installed correctly. If the problem persists, contact the Xerox Welcome Center.
116-702 Data was printed using a substitute font. Check the print data.
116-703 An error occurred during PostScript processing. Check the print data, or disable
bi-directional communication on the print driver.
116-713 The data was divided because the hard disk ran out of space. Delete
unnecessary data from the hard disk.
Code Description and Remedy
