8 Printer Environment Settings
240
5.
Repeat the test for all computers that will be sending jobs to the machine.
The installation process is now complete.
If the test print fails, refer to
Problem Solving chapter on page 349.
UNIX TCP/IP
This section explains how to set up the machine to operate in a UNIX TCP/IP
environment. The UNIX Workstation Operating Systems (OS) supported are Solaris,
SunOS, and HP-UX. The following information is provided:
Information Checklist – page 240
UNIX TCP/IP Environments – page 241
UNIX TCP/IP Installation – page 241
Installation Procedure – page 241
Network Communication Setup – page 241
Workstation Setup – page 243
Test Print – page 247
Printing – page 248
Solaris/HP-UX – page 248
SunOS – page 249
Printer Status – page 251
Solaris/HP-UX – page 251
SunOS – page 252
-C Option – page 253
Information Checklist
Before installing the UNIX TCP/IP features on the machine, make sure that the
following items are available or have been performed.
If you encounter problems during the installation of the machine, refer to
Problem
Solving chapter on page 349.
Item By
An existing operational network utilizing a UNIX TCP/IP protocol is
required. These steps are not designed to install the UNIX TCP/IP
network.
Customer
SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, 10.x, HP-UX 9.x, 10.x, 11.x Customer
Make sure that the correct IP Address is being used for the machine. Customer
Make sure that the Gateway Address is set correctly. Customer
Make sure that the Subnet Mask (for IPv4) or Prefix (for IPv6) is set
correctly.
Customer
Make sure that the Host Name is set correctly. Customer
Test the machine to make sure that it is fully installed and functioning
correctly.
Customer
