Filter
Top Products
18 VRX815
English
Owner’s manual
Basic Operations
Turning the liquid crystal panel
horizontal (Air conditioner
operation mode)
When the way the liquid crystal panel is mounted
hinders the operation of the air conditioner, the
position of the panel can be turned horizontal tem-
porarily.
1. Press and hold the [OPEN] button when the
liquid crystal panel is upright, and release the
button when a beep is heard.
2. The liquid crystal panel turns horizontal.
∗ Press the [OPEN] button again when the liquid
crystal panel is in the horizontal position, and
the panel returns to the original position.
∗ Even if the button is not operated for about 10
seconds, the panel returns to the original posi-
tion with a warning sound.
Turning on and off the monitor
Pressing and holding the [DISP] button for 1 sec-
ond or longer turns the monitor off. To return to
the monitor on, press the [DISP] button once
again.
∗ When a button is pressed or during security moni-
toring, the monitor-off mode is canceled.
Mute
Each time you press the [s] button, mute is
turned on and off.
“MUTE” appears when mute is turned on.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effect
stored in memory. Select the one you prefer.
∗ The factory default setting is “Z-EHCR OFF”.
When a Z-enhancer comes on (1-3), “Z-EHCR”
appears in the display.
•“Z-EHCR 1” (Z-Enhancer 1):
Setting emphasizing bass.
•“Z-EHCR 2” (Z-Enhancer 2):
Setting emphasizing treble.
•“Z-EHCR 3” (Z-Enhancer 3):
Setting emphasizing bass and
treble.
•“Z-EHCR OFF” (Z-Enhancer off):
Neither bass nor treble are
emphasized by the Z-enhancer.
Note:
• Incapable of operation when connecting DSP
(DPH910) and DVD player (DVS9755z).
When the panel is closed:
Each time you press the [Z-EHCR] button of the
remote control unit, the tone effect changes in the
following order:
“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜
“Z-EHCR OFF” ➜ “Z-EHCR 1”...
NOTE:
• When the panel is closed, operations can only be
made through the remote control unit.
When the panel is open:
1. Press the [A-M] button to change into the AU-
DIO-MODE display.
2. Touch the [Z-ENHANCER] key when the AU-
DIO-MODE screen is being displayed to show
the Z-ENHANCER type selection screen.
3. When the Z-ENHANCER type selection screen
is displayed, touch the key for the desirable type
to select it.
•“TYPE 1” (Z-Enhancer 1)
•“TYPE 2” (Z-Enhancer 2)
•“TYPE 3” (Z-Enhancer 3)
•“OFF” (Z-Enhancer off)
4. When the setting is finished, touch the [RTN]
key to return to the AUDIO-MODE screen.
Touch the [RTN] key on the AUDIO-MODE
screen to return to the STANDARD display.
∗ To return from the Z-ENHANCER type selec-
tion display to the STANDARD display, press the
[A-M] button once again.
Adjusting the Z-enhancer
Note:
• The Z-enhancer cannot be adjusted when it is
turned off.
• This function is enabled only when the panel is open.
1. Press the [A-M] button to change into the AU-
DIO-MODE display.
2. Touch the [Z-EHCR LV] key when the AUDIO-
MODE screen is being displayed to show the
Z-ENHANCER level adjustment screen.
3. Touch the [w] or [z] key to adjust to the de-
sirable level.
∗ When type 1 is selected, you can adjust the bass
in the range of ±2.
∗ When type 2 is selected, you can adjust the
treble in the range of ±2.
∗ When type 3 is selected, you can adjust the bass
and treble in the range of ±2.
4. When adjustment is finished, touch the [RTN]
key on the Z-ENHANCER level adjustment