Filter
Top Products
VRX815 29
English
Owner’s manual
Seek tuning
1. Press the [BAND] button and select the de-
sired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display (or when the panel
is closed, if the indicator “ ” is not lit), press
and hold the [BAND] button for 1 second or
longer. “MANU” in the display goes off (or when
the panel is closed, the indicator “ ” lights)
and seek tuning is now available.
2. Press the right (d) or left (a) side of the
[SEARCH] button to automatically seek a sta-
tion. Press the right (d) side of the [SEARCH]
button to automatically tune up the frequency
band to the next available TV station; press the
left side to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning. When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired fre-
quency.
1. Press the [BAND] button and select the de-
sired band. (TV1 or TV2)
∗ If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “ ” is lit),
press and hold the [BAND] button for 1 second
or longer. “MANU” appears in the display (or
when the panel is closed, the indicator “ ”
goes off) and manual tuning is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the right (d) or left (a) side of
the [SEARCH] button for 1 second or longer to
tune in a station.
●Step tuning:
Press the right (d) or left (a) side of the
[SEARCH] button to manually tune in a station.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds longer. (
∗
Only when connect-
ing the TTX7503Z or TTX7504Z with this unit)
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite
TV stations and store them in memory for later
recall.
1. Press the [BAND] button and select the de-
sired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the desired
[DIRECT] button to select that station.
TV Operations
∗ Press and hold one of the [DIRECT] buttons for
2 seconds or longer to store the current station
into the preset memory.
∗ When the panel is open, the same operation is
also available by using the [a] and [d] but-
ton in the panel.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current sta-
tion to that preset memory.
Auto store
Auto store selects 6 TV stations automatically and
stores each one into a preset memory.
If there are not 6 stations with good reception, sta-
tions previously stored in memory remain and only
the strong stations are stored into memory.
1. Press the [BAND] button and select the de-
sired TV band. (TV1 or TV2)
2. Touch the [SUB MODE] key in the MENU dis-
play, the [AUTO STORE] key appears in the
display.
Touch and hold the [AUTO STORE] key for 2
seconds or longer. The stations with good re-
ception are stored automatically to the preset
channels.
∗ The same operation is also available by using
the [SCN] button for 2 seconds or longer in the
panel.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Touch the [SUB MODE] key in the MENU dis-
play, the [PRESET SCAN] key appears in the
display.
Touch the [PRESET SCAN] key to start pre-
set scan.
2. When the desired channel is received, touch
the [PRESET SCAN] key again.
∗ The same operation is also available by using
the [SCN] button in the panel.