Filter
Top Products
40 VRX815
English
Owner’s manual
Calling DSF BASIC Pattern/USER
Pattern
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [z] key to select DSF mode. Touch
the [DSF BASIC1], [DSF BASIC2] and [DSF
USER] key to show BASIC pattern selecting
display or USER pattern selection/memory dis-
play.
3. In the pattern selecting display, touch the one
of pattern key to call corresponding DSF mode.
In this display, pressing the No. button in cor-
respondence to the [DIRECT] key can also call
the DSF mode.
∗ After selecting the DSF mode, touch the
[MEMO] key to copy the selected pattern to the
USER pattern.
∗ Touch the [EDIT] key to show DSF adjusting dis-
play, in which the properties of currently selected
pattern can be adjusted.
∗ By pressing the [BAND] button in BASIC pat-
tern selecting display or USER pattern selec-
tion/memory display you can switch between the
two patterns, BASIC and USER.
4. After the setting, press the [A-M] button again
or touch the [RTN] key two times to return to
the STANDARD display.
Setting and storing DSF Properties/
Memory into USER Pattern
1. Repeat the steps 1 and 2 of the previous pro-
cedure (Calling DSF BASIC Pattern/USER
Pattern) to show BASIC pattern selecting dis-
play or USER pattern selection/memory dis-
play.
2. Touch the [EDIT] key to show the DSF adjust-
ing display.
3. Select an item to be adjusted by touching
[ITEM] key in the DSF adjusting display.
There are “EFFECT”, “DELAY”, “REAR MIX”,
“REVERB TIME” (ROOM SIZE) and “HIGH”
(LIVENESS).
4. Touch the [w] or [z] key to set each adjust-
ing value.
5. After making adjustments to a desired pattern
by repeating the operations of items 3 and 4,
touch the [RTN] key to change over to the BA-
SIC/USER patterns selection/memory display.
6. Press and hold one of [DIRECT] button for 2
seconds or longer to store the adjusted DSF
pattern to the USER memory.
DSP operations
7. To set a title of the stored USER pattern, touch
the [TITLE] key to change into the [TITLE IN-
PUT] key.
∗ For title inputting method, refer to the section
“Entering titles”.
8. Press the [A-M] button to change into the
STANDARD display.
Professional mode/VSE opera-
tions
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard mode
is not reflected in the adjustment in professional
mode.
VSE effect ON/OFF
∗ The factory default setting is “ON”.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [VSE ON/OFF] key to select “on”
and “off”.
3. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.
4. After the setting, press the [A-M] button again
or touch the [RTN] key to return to the STAN-
DARD display.
Note:
• If the VSE effect is set to OFF, the adjustment made
in “VSE operations” is not reflected in the music
source.
Calling VSE BASIC Pattern/USER
Pattern
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [VSE BASIC] and [VSE USER] key
to show BASIC pattern selecting display or
USER pattern selection/memory display.
3. In the pattern selecting display, touch the one
of pattern key to call corresponding VSE pat-
tern.
In this display, pressing the No. button in cor-
responding to the [DIRECT] key can also call
the VSE pattern.
∗ After selecting the VSE pattern, touch the
[MEMO] key to copy the selected pattern to the
USER pattern.