Filter
Top Products
42 VRX815
English
Owner’s manual
Setting and storing P.EQ
Properties/Memory into USER
Pattern
1. In the Basic adjustment display or in the User
setting display, press the [A-M] button to show
the AUDIO-MODE display.
2. Touch the [EDIT] key to show the P.EQ adjust-
ing display.
3. Select an item to be adjusted by touching
[ITEM] key in the P.EQ adjusting display.
4. Touch the [ITEM] key to set each adjusting
value.
The P.EQ adjustment contents are as follows:
●“FRONT/REAR”
●“BAND”
Select the channel to be compensated (front
or rear).
●“FREQUENCY”
Select the center frequency that you want to
compensate from the range of 20 Hz to 20 kHz.
(1/3 octave step, 31 points)
●“GAIN”
Adjust the gain (output level) in the range of -
12 dB to +12 dB. (1 dB step, 25 points)
●“Q”
Set the sharpness of the Q-curve to one of the
parameters: 1, 3, 5, 7 and 20.
5. After making adjustments to a desired pattern
by repeating the operations of items 3 and 4,
touch the [RTN] key to change over to the BA-
SIC/USER pattern selection/memory display.
6. Press and hold one of [DIRECT] button for 2
seconds or longer to store the adjusted P.EQ
pattern to the USER memory.
7. To set a title of the stored USER pattern, touch
the [TITLE] key to change into the [TITLE IN-
PUT] key.
∗ For title inputting method, refer to the section
“Entering titles”.
8. Press the [A-M] button to change into the
STANDARD display.
DSP operations
DVD Operations
Operation
●Play/Still operation
Pressing and holding the [s] button for about
1 second or longer switches to the desired mode
(play, still (pause)).
Each time the button is pressed and held for about
1 second or longer, the mode is switched sequen-
tially.
When the [d] button is kept pressed during the
still mode, slow play (1/2 play) is performed so far
as the button is pressed.
●Chapter up/down operation (FF/FB opera-
tion)
Press the right side of [SEARCH] button for 1 sec-
ond or shorter to increment chapters.
Hold down the right side of [SEARCH] button for
1 second or longer to fast forward.
Press the left side of [SEARCH] button for 1 sec-
ond or shorter to decrement chapters.
Hold down the left side of [SEARCH] button for 1
to fast backward.
Woofer level adjustment
You can adjust an output sound level of subwoofer.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [WOOFER VOL] key to show the
woofer level adjusting display.
3. Touch the [w] or [z] key to adjust the level
(-6 to +3)
4. After adjustment, touch the [RTN] key to re-
turn to the STANDARD display.
Center level adjustment
You can adjust an output sound level of center
speaker.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [CENTER VOL] key to show the
center level adjusting display.
3. Touch the [w] or [z] key to adjust the level
(0 to -6)
4. After adjustment, touch the [RTN] key to re-
turn to the STANDARD display.
Adjusting the balance and fader
1. Press the [A-M] button to change into the AU-
DIO-MODE display.