Filter
Top Products
VRX815 35
English
Owner’s manual
3. Touch the [TITLE INPUT] key in the MENU
display.
Touch the [INPUT] key in the USER TITLE dis-
play, the display switches to the title input mode
display.
4. Touch the characters, symbols, etc. shown in
the display to input titles.
“←, →” : Centering
“BS” : Backspace
“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll
NOTE:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
(
z
) at the lower left of the display.
5. Repeat the step 4 to enter the complete title.
6. Touch the [MEMO] key for 2 seconds or longer
to store the title into memory and cancel title
input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
∗ You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner, TV or DAB) mode.
Cancel those operation modes before to display a
title list.
1. With the unit in radio, CD/MD changer, TV or
DAB mode, touch the [P. CH SELECT], [DISC
SELECT] key. A title list is displayed. The fol-
lowing functions can be carried out in a title list
display.
●TUNER: A title of a station stored in the pre-
sets 1 to 6 or frequency is displayed;
●CD/MD changer: DISC titles for discs 1 to 6
are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, ”NO DISC” is displayed.
●TV: A title of a channel stored in the presets
1 to 6 or a channel number is displayed.
2. Touch the [DIRECT] key (1 to 6) to select one
of the items 1 to 6 and reproduce the selected
broadcast station or disc.
∗ In case of 12-CD changer, touch the [DISC SE-
LECT] key to change over to a list display of
discs 7 to 12.
3. Touch the [RTN] key again to return to the
STANDARD display.
Always turning on the button
illumination on the operation panel
Note:
• The following operation is enabled when the panel
is open.
• Doing this operation turns on and off the illunination
only for the buttons of VoL [+] and [–], [TILT], and
[OPEN].
The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.
●“OFF”: Button illumination on the operation
panel turns on for 5 seconds;
●“ON”: Button illumination is always on when the
power is turned on;
1. When the panel is open, press the [ADJ] but-
ton to show the adjustment selection display.
2. Touch the [UPPER ILLUMI] key to select “ON”
or “OFF”.
3. Touch the [ON] or [OFF] key for setting.
4. Press the [ADJ] button to return to the previ-
ous mode.
∗ To set “ON” again, switch “OFF” to “ON” manu-
ally.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, TV sta-
tions and CDs. The numbers of titles that can be
entered for each mode are as follows.
Other Functions
∗ You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER, TV or DAB) mode. Can-
cel each of those operations before entering titles.
1. Press the [FUNC] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
2. Select and play a CD or a CD in the CD changer
or tune in to a Radio station or a TV station for
which you want to enter the title.
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
Number of titles
60 titles
100 titles
50 titles
Mode
TUNER mode
TV mode
CD mode
Number of titles
30 titles
15 titles
50 titles