Filter
Top Products
20 VRX815
English
Owner’s manual
FM reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control, En-
hanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
Changing the reception area
This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using
it outside the USA, the frequency reception range
can be switched to the intervals below.
●Setting the reception area
While pressing [DISP] button, each time you press
and hold the number “6” of the [DIRECT] buttons
for 2 seconds or longer, the reception area
switches from inside the USA to outside the USA
or from outside the USA to inside the USA.
∗ Any station preset memories are lost when the re-
ception area is changed.
Listening to the radio
1. Press the [FUNC] button and select the RA-
DIO mode. The frequency is displayed.
2. Press the [BAND] button and select the radio
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the right (d) or left (a) side of the
[SEARCH] button to tune in the desired sta-
tion.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Tune in to a station.
∗ If “MANU” is lit in the display (or when the panel
is closed, if the indication “ ” is not lit) press
and hold the [BAND] button for 1 second or
longer. “MANU” in the display goes off (or when
the panel is close the indication “ ” lights)
and seek tuning is now available.
3. Press the right (d)or left (a) side of the
[SEARCH] button to automatically seek a sta-
tion.
When the right (d) side of the [SEARCH] but-
Radio Operations
ton is pressed, the station is sought in the di-
rection of higher frequencies; when the left (a)
side of the [SEARCH] button is pressed, the
station is sought in the direction of lower fre-
quencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
∗ If “MANU” is not lit in the display (or when the
panel is closed, if the indicator “ ” is lit),
press and hold the [BAND] button for 1 second
or longer. “MANU” appears in the display (or
when the panel is closed, the indicator “ ”
goes off) and manual tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the right (d) or left (a) side
of the [SEARCH] button for 1 second or longer
to tune in a station.
● Step tuning:
Press the right (d) or left (a) side of the
[SEARCH] button to manually tune in a sta-
tion.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding [DI-
RECT] button recalls the stored radio frequency
automatically.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons for
2 seconds or longer to store that station into pre-
set memory.
∗ When the panel is open, the same operation is
also available by using the [a] and [d] but-
ton in the panel.