Filter
Top Products
38 VRX815
English
Owner’s manual
DSP operations
Woofer level adjustment
You can adjust an output sound level of subwoofer.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [WOOFER VOL] key to show the
woofer level adjusting display.
3. Touch the [w] or [z] key to adjust the level
(0 to 14)
4. After adjustment, touch the [RTN] key to re-
turn to the STANDARD display.
Entering titles
You can give a title to the user memory of the
G.EQ, DSF, VSE and P.EQ that you have adjusted
yourself.
1. Press the [A-M] button to select the adjustment
mode in which you want to give a title.
2. Touch the [USER] key to select the “USER”.
3. Touch the [USER TITLE] key to select the user
memory to which you want to give a title.
4. Touch the [TITLE] key in the USER TITLE dis-
play, the display switches to the title input mode
display.
5. Touch the characters, symbols, etc. shown in
the display to enter titles.
“←, →” : Centering
“BS” : Backspace
“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll
Note:
• Up to 8 characters can be input.
• To switch the character types, touch the scroll key
(
w
) at the lower left of the display.
6. Repeat the step 5 to input the title.
7. Touch the [MEMO] key for 2 seconds or longer
to store the title into memory.
8. Press the [A-M] button again. The unit returns
to the previous mode.
Standard mode/Setting the lis-
tening position
Selection of listening position
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [z] key to select “POSI. SELECT”.
Touch the [POSI. SELECT] key to set the lis-
tening position type.
There are FULL SEAT, FRONT R (only right
seat), FRONT L (only left seat), FRONT (only
front seats), REAR (only rear seats) and PASS
available for the listening position types.
∗ The factory default setting is “FULL SEAT”.
Detail adjustment of listening
position
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [z] key to select “POSI. DETAIL”.
Touch the [POSI. DETAIL] key to show Posi-
tion Detail adjusting display.
3. Touch the [w] or [z] key to adjust to a de-
sired fader.
Adjusting range of the fader: front 9/rear 9
4. Touch the [Î] or [Å] key to adjust to a de-
sired balance.
Adjusting range of the balance: left 9/right 9
5. When the adjustment is finished, press the [A-
M] button again or touch the [RTN] key two
times to return to the STANDARD display.
Standard mode/G.EQ operations
Note:
• The adjustment made in standard mode is not re-
flected in the adjustment in professional mode. Re-
spectively, the adjustment made in professional
mode is not reflected in the adjustment in standard
mode.
G.EQ effect ON/OFF
∗ The factory default setting is “ON”.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [G.EQ ON/OFF] key to select “on”
and “off”.
3. Each time the [ON/OFF] key is touched, the
on and off statuses are switched alternately.
4. After the setting, press the [A-M] button again
or touch the [RTN] key to return to the STAN-
DARD display.
Note:
• If the G.EQ effect is set to OFF, the adjustment made
in “G.EQ operations” is not reflected in the music
source.