Filter
Top Products
280-7705-00
VRX815 75 VRX815
280-7705-00
6 VRX815
280-7705-00
English Français Español
English
Owner’s manual
English
Owner’s manual
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Main unit / Unité principale / Unidad principal
With the Display closed / Avec l`afficheur fermé / Con el visualisador cerrado
With the Display open / Avec l`afficheur ouvert / Con el visualisador abierto
3.
CONTROLS / COMMANDES / CONTROLES
4.NOMENCLATURE
[
OPEN
]
[
TILT
]
[
DISP
]
[
ISR
]
[
RELEASE
]
[s]
[Q]
[
SEARCH
]
[
DIRECT
]
[
SENSOR
]
[
BAND
] [
FUNC
]
[
VOL
]
[
ADJ
]
[
A-M
]
[
M.LOCK
]
[
RDM
]
[
RPT
]
[
SCN
]
[
]
[
]
[
]
When the display open
[A•M] button
• Shows the AUDIO MODE menu for tone adjust-
ment, etc. Press and hold this button for 1 sec-
ond or longer to switch the loudness on or off
(LOUD ON/OFF).
[ADJ] button
• Shows the ADJUST MODE menu to change the
settings.
[RDM] button
• Performs random play while in the CD mode or
CD/MD changer mode. Also performs disc ran-
dom play when the button is pressed and held
while in the CD/MD changer mode.
[RPT] button
• Plays repeatedly while in the CD mode or CD/
MD changer mode. When this button is pressed
and held while in the CD/MD changer mode,
disc repeat play is performed.
[SCN] button
• Performs preset scan while in the radio mode.
When the button is pressed and held, auto store
is performed.
• Performs scan play for 10 seconds for each track
while in the CD mode and CD/MD changer
mode. Disc scan play is performed when the
button is pressed and held while in the CD/ MD
changer mode.
When the display closed
[VOL] button
• Use this button to increase/decrease the vol-
ume.
[TILT] button
• Use this button to adjust the angle of the liquid
crystal panel in 5 steps.
• Every time this button is pressed and held for
about 2 seconds or longer, the liquid crystal
panel moves forward/backward in 3 steps.
[OPEN] button
• Use this button to open/close the liquid crystal
panel.
• Press and hold this button for about 2 seconds
or longer so that the liquid crystal panel is posi-
tioned horizontally when the liquid crystal panel
is open. Press the button again to return the
panel to the original position. Even if the button
is not pressed, the panel returns to the original
position after about 10 seconds.
[DISP] button
• Use this button to switch the indications such
as play status on the information panel when
the liquid crystal panel is closed.
• Use this button to call the LCD background
screen setup menu when the liquid crystal panel
is open.
• Press and hold this button for 1 second or longer
to turn off the monitor when the liquid crystal
panel is open.
• Use this button to switch the display sizes while
in the screen where the TV, VISUAL, or DVD
video mode is suspended.
[ISR] button
• Use this button to enter the ISR (Instant station
recall) standby mode.
[SENSOR]
• Remote control infrared sensor
Names of Buttons
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
[FUNC] button
• Press this button to turn on the power. Press
and hold this button for 1 second or longer to
turn off the power.
• Press this button to switch the modes such as
radio.
[BAND] button
• Press this button to switch the receiving bands
for radio/DAB/TV mode, etc. Press and hold this
button for 1 second or longer to switch the SEEK/
MANUAL tuning modes.
• Use this button to move to the first track on a
disc in the CD mode.
• Use this button to switch to the next disc in the
CD/MD changer mode.
[DIRECT] button
• Use this button to select a preset channel in the
radio/DAB/TV mode.
• Use this button to select a disc in the CD/MD
changer mode.
[SEARCH] button
• Use this button to tune to a station in the radio/
DAB/TV mode.
• Use this button to select a track in the CD/DVD
video mode and CD/MD changer mode.
[Q] button
• Use this button to eject a CD.
[s] button
• Use this button to mute the sound.
• Press and hold this button for 1 second or longer
to enter the play pause mode in the CD/DVD
video mode and CD/MD changer mode. Press
and hold the button for 1 second or longer again
to resume playback.
[RELEASE] button
• Use this button to remove the DCP from the main
unit.
[a] [d] button
• Use this button to select a track in the CD/DVD
video mode and CD/MD changer mode.
[s] button
• Use this button to mute the sound.
• Press and hold this button for 1 second or longer
to enter the play pause mode in the CD/DVD
video mode and CD/MD changer mode. Press
and hold the button for 1 second or longer again
to resume playback.
[M.LOCK] button
• The display panel can be switched to a com-
posite screen to lock the monitor or to view a
video CD.