Garmin 696 Car Stereo System User Manual


  Open as PDF
of 276
 
Garmin GPSMAP 695/696 Owner’s Manual
190-00919-00 Rev. F
Appendix D
215
Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
and PGRMH.
•Fast Mode: GPRMB, GPRMC, PGRMZ, and PGRMH.
tis-A interfAce setUp
Configuring TIS-A input:
1)
Press the MENU Key twice to select the Main Menu.
2)
Turn or move the FMS Joystick to select ‘System Setup’, and press the ENT
Key.
3)
Turn or move the FMS Joystick to select ‘Interface’, and press the ENT Key.
4)
With the ‘Serial Data Format’ field highlighted, turn the FMS Joystick to
select ‘TIS-A In’
or GTX TIS-A In/NMEA & VHF Out
.
The TIS-A Status field indicates one of the following messages:
• WaitingForData—searchingforavalidTIS-Adatastream.
• DataAvailable—receivingTIS-Adatafromthetransponder.
• DataUnavailable—connectiontotransponderestablished,butTIS-Aserviceis
unavailable.
• LostConnection—anerroroccurredortheconnectiontothetransponderwas
lost.
USING AN EXTERNAL GPS ANTENNA (OPTIONAL)
The optional GA25 MCX antenna can be used. Connect the antenna to the connector
located on the left side of the unit.
MCX Connector (for an optional
external antenna)
GPSMAP 695/696 MCX Connector
 previous next