Filter
Top Products
37
Installation for Monitor Unit
When mounting the main unit after checking the operation, close the monitor first.
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction.
Metal mounting strap
(commercially available)
Self-tapping screw
(commercially available)
Firewall or metal support
Screw (M4X6)
(commercially
available)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Installing in Japanese-Made Cars-1
■
Audio Unit.etc
or
Accessory I
Accessory I
When the vehicle bracket is attached as in Toyota, Nissan,
Mitsubishi, and other vehicles that use a hole in the ● position
in the figure below.
Not use the Hard Rubber Frame
(Accessory E).
Screw (Provided with the
Audio Unit.etc)
Screw (Provided with the Audio Unit.etc)
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 37