Filter
Top Products
4
Before Use
Safety Precautions
To prevent injury and/or fire, take the following
precautions:
• Ensure that the unit is securely installed. Otherwise it
may fly out of place during collisions and other jolts.
• When extending the ignition, battery or ground wires,
make sure to use automotive-grade wires or other cables
with an area of 0.75mm
2
(AWG18) or more to prevent
wire deterioration and damage to the wire coating.
• To prevent short circuits, never put or leave any metallic
objects (e.g., coins or metal tools) inside the unit.
• If the unit starts to emit smoke or strange smells, turn off
the power immediately and consult your Kenwood dealer.
• Do not touch the liquid crystal fluid if the LCD is damaged
or broken due to shock. The liquid crystal fluid may be
dangerous to your health or even fatal.
If the liquid crystal fluid from the LCD contacts your body
or clothing, wash it off with soap immediately.
To prevent damage to the machine, take the
following precautions:
• Make sure to ground the unit to a negative 12V DC power
supply.
• Do not open the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
• Do not subject the faceplate to excessive shock, as it is a
piece of precision equipment.
• When replacing a fuse, only use a new one with the
prescribed rating. Using a fuse with the wrong rating may
cause your unit to malfunction.
• To prevent short circuits when replacing a fuse, first
disconnect the wiring harness.
• Do not use any screws except for the ones provided. The
use of improper screws might result in damage to the
main unit.
• You cannot view video pictures whilst the vehicle is
moving. To enjoy TV/video pictures, find a safe place to
park and engage the parking brake.
• If you experience problems during installation, consult
your Kenwood dealer.
• If the unit does not seem to be working right, try pressing
the reset button first. If that does not solve the problem,
consult your Kenwood dealer.
• We recommend the use of the Security Code function (see
p. 10) to prevent theft.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry
soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a
cloth moistened with neutral cleaner, then wipe neutral
detergent off.
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Screen brightness during low temperatures
When the temperature of the unit falls such as during
winter, the liquid crystal panel's screen will become
darker than usual. Normal brightness will return after
using the monitor for a while.
IMPORTANT INFORMATION
About the disc changer/CD player to be
connected:
To connect a disc changer having the "O-N" switch to this
unit, set the "O-N" switch to "N".
To connect a disc changer having no "O-N" switch to this
unit, the converter cord CA-DS100 and/or switching
adapter KCA-S210A are required as options.
A disc changer doesn't work when it is connected
without using these options.
If a model with no "O-N" switch is connected, some
unavailable functions and information that cannot be
displayed are generated.
Note that none of the KDC-C100, KDC-C302, C205, C705,
and non-Kenwood CD changers can be connected.
You can damage both your unit and the CD changer if you
connect them incorrectly.
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
About RDS
RDS (Radio Data System)
RDS is a service used by radio stations to transmit data
outside normal radio broadcast signals.
When an RDS station is received, you can immediately
find out what kind of data is being transmitted by looking
at the program service name, which appears in the
display after the frequency.
The RDS indicator turns on when an RDS station is being
received.
Alarm
When an emergency transmission (announcing disasters,
etc.) is made, the current function will be interrupted to
allow the warning to be received under the following
conditions:
during tuner reception, or when the Traffic Information
function is turned on.
2CAUTION
NOTE
2CAUTION
2WARNING
Reset button
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 4