Filter
Top Products
45
The following messages are displayed when
certain problems are occurring in your system.
Take the recommended actions.
EJECT: No disc magazine has been loaded in the
changer. The disc magazine is not completely
loaded.E01
➪
Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
NO DISC: No disc has been loaded in the disc
magazine.
E02
➪
Load a disc into the disc magazine.
READ ERROR:No disc has been loaded in the disc
magazine.
E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down.
The CD is scratched a lot.
➪ Clean the CD and load it correctly.
BLANK DISC: Nothing has been recorded on the MD.
E10
NO TRACK DISC
:No tracks are recorded on the MD, although it
has a title.E11
NO PANEL: The faceplate of the slave unit being
connected to this unit has been removed.
E30
➪
Replace it.
E-77: The unit is malfunctioning for some
reason.
E77
➪
Press the reset button on the unit. If the "E-
77" code does not disappear, consult your
nearest service center.
MECHA ERROR
: Something is wrong with the disc magazine.
Or the unit is malfunctioning for some
reason.E99
➪
Check the disc magazine. And then press
the reset button on the unit. If the "Mecha
Error" code does not disappear, consult
your nearest service center.
E-99: The unit is malfunctioning for some
reason.
E99A
➪
Press the reset button on the unit. If the "E-
99" code does not disappear, consult your
nearest service center.
HOLD ERROR:The protective circuit in the unit activates
when the temperature inside the automatic
disc changer exceeds 60°C (140°F), stopping
all operation.
E0d
➪
Cool down the unit by opening the
windows or turning on the air conditioner.
As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME: • Attempted to display SNPS during the
receiving session of the station having no
station name preset.
E50
• Attempted to display DNPS during the CD
play having no disc names preset.E51
NO TLTLE: Attempted to display the disc title or track
title while the MD having no MD title is being
played.E53
NO TEXT: • Attempted to display the disc text or track
text while the CD having no CD text is
being played.E54
• Attempted to display text during reception
of the station that isn't sending text
data.E55
WAITING: Radio text data is being received.E56
LOAD: Discs are being exchanged in the Disc
changer.E57
NO ACCESS: After setting it in the Disc Changer, Disc list
Screen was done without having it been
played at least 1 time.
E58
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 45