Filter
Top Products
27
Understanding Common Operations
—Continued
You can select DVD, FM, AM, or connected external
audio/video equipment (HDD, CD-R, TAPE, LINE) as
the audio source.
To select the audio source, press the INPUT or
button repeatedly.
Press MUTING on the remote controller. The MUTING
indicator lights in the display.
To restore the sound, press MUTING again.
Tip:
During muting:
• If you press VOLUME +/– on the remote controller or
turn VOLUME on the front panel, the sound will be
restored.
• If you turn the unit off and then on again, the sound
will be restored.
Press DIMMER on the remote controller.
Every time you press the button, the display brightness
will change as follows:
Decrease the volume, then connect the stereo head-
phones mini plug to the PHONES jack.
You can adjust the volume and mute the sound as
described above.
The speakers will reproduce no sound while the head-
phones are connected.
Hint:
When you connect a pair of headphones, the listening
mode is set to Stereo, unless it’s already set to Stereo,
Mono, or Direct.
Selecting a Source
Muting the Sound
Remote
controller
DVD receiver
DVD FM AM
TAPELINE
MUTING
Controlling Display Brightness
Listening through the Headphones
normal dim dimmer
To PHONES jack