Filter
Top Products
45
Listening to the Radio
—Continued
You can store the frequencies of stations one by one manually into the preset memory channels. This is useful
when you want to program the stations in your favorite order.
Turn on the power to the unit before you start the procedure.
Programming FM/AM Stations One by One – Preset Write
2
5
2-5
• You can preset up to 30 channels including
both FM and AM stations. For example, if you
have already stored FM stations to eight chan-
nels, you can use 22 channels to store preset
AM stations.
• Programmed FM and AM stations are indi-
cated separately. Therefore, one of the preset
FM stations and one of the preset AM stations
could use the same channel number.
• The Preset Write function enables you to store
radio station frequencies to any channel num-
ber. For example, you could program three AM
stations to channels 2, 5, and 9.
Before auto presetting
Display
1
Tune into the FM/AM station that
you want to store a preset.
2
Press EDIT/NO/CLEAR and turn
MULTI JOG until “Preset Write?”
appears in the display.
3
Press MULTI JOG.
The channel number to be preset flashes.
To cancel presetting, press EDIT/NO/
CLEAR instead.
4
If you wish to change the channel
number, turn MULTI JOG.
5
Press MULTI JOG to confirm.
If “Complete” appears
The radio station is registered to the pre-
set channel.
If “Overwrite?” appears
The channel you’ve selected is registered
already.
• To register the new radio station by
deleting the existing radio station
Press YES/MODE.
• To cancel presetting
Press EDIT/NO/CLEAR.
If “Memory Full” appears
The FM/AM stations have already been
programmed into all 30 channels. Delete
unnecessary stations (page 49) and try
again.
6
Repeat steps
2
to
5
to preset the next
channel.