Filter
Top Products
42
Listening to the Radio
With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick
selection.
Turn on the power to the unit before you start the procedure.
Auto Tuning Mode
When tuned into a station, the Tuned indicator
appears. When tuned into a stereo FM station, the FM ST
indicator appears on the display, as shown.
Manual Tuning Mode
The DVD receiver changes FM frequency in 0.05 MHz
steps, 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into weak FM stereo stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Manually Tuning a FM/AM Broadcast Station
1
Select FM or AM.
Press the INPUT or button to
select FM or AM.
The channel selected most recently will
be recalled.
2
Press MODE so that the AUTO
indicator appears on the display.
Alternatively, you may press YES/
MODE on the DVD receiver to do so.
3
Press TUNING / .
Searching stops when a station is found.
3
1
2
AUTO FM ST
Band Frequency
AUTO FM ST
AUTO FM ST
Tuned indicator
1
Select FM or AM.
Press the INPUT or button to
select FM or AM.
The channel selected most recently will
be recalled.
2
Press MODE so that the AUTO
indicator disappears from the dis-
play.
Alternatively, you may press YES/
MODE on the DVD receiver to do so.
3
Press and hold TUNING / .
The frequency stops changing when you
release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
AUTO FM ST
Band Frequency