Filter
Top Products
68
Initial Settings menu
The Initial Settings menu provides audio and video out-
put settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
Notes:
• In the following table, the default setting is shown in
bold: other settings are shown in italics.
• Check the operating instructions supplied with your
other equipment to see which digital audio formats it’s
compatible with.
• Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
Video Output settings
Using the Initial Settings menu
DVD SETUP
ENTER
/ / /
1
Press DVD SETUP and select “Ini-
tial Settings”.
2
Use the cursor buttons and
ENTER to select the setting and
option you want to set.
All the settings and options are explained
on the following pages.
Setting Option What it means
TV Screen
(See also “Screen sizes
and disc formats” on
page 73.)
4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the
screen.
16:9 (Wide) Set if you have a widescreen TV.
AV Connector Out
Video
Ordinary (composite) video output.
Compatible with all TVs.
S-Video
Almost the same quality as RGB, but can give better results if
you’re using a long SCART cable.
RGB If your TV is compatible, this gives the best picture quality.