Filter
Top Products
20
21
User Data
This unit can save up to five combinations of set values for main menu and screen adjustments made in the picture adjusting menu as
user data that can be recalled. You can also return settings and adjustments to their factory defaults.
User data include the following settings.
• Menu settings except “SETUP LOAD/SAVE” and “REMOTE in CONTROL” (including button function settings on the monitor front
panel)
• Screen adjustments made with the picture adjusting knob
Saving user data
1.
Press [MENU] to display the main menu.
2. Turn the rotary knob to select the “SYSTEM CONFIG”
menu and press the rotary knob.
3. Turn the rotary knob to select the “SETUP SAVE” sub-
menu and press the rotary knob.
The setting in the sub menu changes to green.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER DOWN
POWER SAVE MODE
CALIBRATION
FULL
CENTER
3SEC OFF
FACTORY
USER1
LAST
EBU
OFF
OFF
Changes to green
4. Turn the rotary knob to select settings to save from the
“USER1” to “USER5” and press the rotary knob.
The following screen appears.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SETUP SAVE]
USER1
YES
NO
5. Select “YES” and press the rotary knob.
This saves the user data.
6. To return to the previous screen, press [RETURN].
Loading user data
1.
Press [MENU] to display the main menu.
2. Turn the rotary knob to select the “SYSTEM CONFIG”
menu and press the rotary knob.
3. Turn the rotary knob to select the “SETUP LOAD” sub-
menu and press the rotary knob.
The setting in the sub menu changes to green.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER DOWN
POWER SAVE MODE
CALIBRATION
FULL
CENTER
3SEC OFF
FACTORY
USER1
LAST
EBU
OFF
OFF
Changes to green
4. Turn the rotary knob to select settings to load from the
“USER1” to “USER5” and press the rotary knob.
The following screen appears.
• To return to the factory default, select “FACTORY.”
MENUEXIT
RETURN
RETURNSEL. ENTER
[SETUP LOAD]
USER1
YES
NO
5. Select “YES” and press the rotary knob.
This loads the user data.
6. To return to the previous screen, press [RETURN].