Filter
Top Products
22
Main menu (continued)
23
MARKER
The underlined values are factory preset setting values.
Sub menu Settings Description
MARKER
OFF
*
1
ON
Enables the MARKER setting.
16:9
*
2
*
3
OFF
4:3
13:9
14:9
CNSCO 2.39
CNSCO 2.35
2:1
VISTA
95%
93%
90%
88%
80%
USER 85%
VAR. H. 85% V. 85%
Selects/displays the marker type for when the angle of view of the displayed
image is 16:9.
<OFF> No marker display
<4:3> 4:3 marker
<13:9> 13:9 marker
<14:9> 14:9 marker
<CNSCO 2.39> 2.39:1 marker
<CNSCO 2.35> 2.35:1 marker
<2:1> 2:1 marker
<VISTA> VISTA marker
<95%> 95 % area marker
<93%> 93.1 % area marker (TYPE1)
93 % area marker (TYPE2)
<90%> 90 % area marker
<88%> 89.5 % area marker (TYPE1)
88 % area marker (TYPE2)
<80%> 80 % area marker
<USER> An area marker that is adjustable in 1 % increments within a range
of 80 to 100 %. However, when MARKER TYPE is TYPE1, 88 %
and 93% indicate area markers whose height are 89.5 % and
93.1 %, respectively.
(The factory preset setting value is 85 %.)
<VAR.> This area marker can be varied in 1 % increments in the range
between 80 % to 100 % separately for vertical and horizontal.
(The factory default is 85 % for both vertical and horizontal)
4:3
*
2
*
4
OFF
95%
93%
90%
88%
80%
USER 85%
VAR. H. 85% V. 85%
Selects/displays the marker type for when the angle of view of the displayed
image is 4:3.
<OFF> No marker display
<95%> 95 % area marker
<93%> 93 % area marker
<90%> 90 % area marker
<88%> 89 % area marker (TYPE1)
88 % area marker (TYPE2)
<80%> 80 % area marker
<USER> An area marker that is adjustable in 1 % increments within a range
of 80 to 100 %. However, when MARKER TYPE is TYPE1, 88 %
indicates an area marker whose height is 89 %.
(The factory preset setting value is 85 %.)
<VAR.> This area marker can be varied in 1% increments in the range
between 80 % to 100 % separately for vertical and horizontal.
(The factory default is 85 % for both vertical and horizontal)
BACK
*
2
NORMAL
HALF
BLACK
Selects the background brightness around the marker.
<NORMAL> Normal background
<HALF> 50 % background brightness
<BLACK> 0 % background brightness (black)
CENTER
*
2
OFF
ON
Displays the center marker.
<OFF> Turns the display off
<ON> Turns the display on
*
1
This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*
2
These settings are disabled when the GPI function (→page 44) is used to control the marker setting.
*
3
These settings are enabled when the SD aspect setting for an HD signal and SD signal is 16:9 (→page 26 “SD ASPECT”)
*
4
These settings are enabled when the SD aspect setting for an SD signal is 4:3 (→page 26 “SD ASPECT”)