Filter
Top Products
! The number in the
2
mark on a DVDs pack-
age indicates the number of recordedsubtitle
languages.
! With some DVDs, switching between subtitle
languages may only be possible usinga menu
display.
! You can also switch between subtitle lan-
guages using DVD SETUP. For details, refer to
Setting the subtitle language on page 77.
! Touching SUB.T during fastforward/fast re-
verse, pause or slow motion playbackreturns
you to normal playback.
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during play-
back.
! During playback of a scene shot from mul-
tiple angles, the angle icon
is dis-
played. Turn angle icon display on or off
using DVD SETUP. For details, refer to Set-
ting angle icon display on page 79.
% Touch ANGLE during playback of a
scene shot from multiple angles.
Each time you touch ANGLE it switches be-
tween angles.
Notes
! You can also changing angle using ANGLE on
the remote control.
! The
3
mark on a DVDs package indicates it
features multi-angle scenes. The number in
the
3
mark indicates the number of angles
from which scenes were shot.
! Touching ANGLE during fastforward/fast re-
verse, pause or slow motion playbackreturns
you to normal playback.
Resume playback (Bookmark)
The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
% During playback, press
BOOKMARK (BOOK.M) at the point you
want to resume playback next time
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmarkon a disc, press and
hold BOOKMARK (BOOK.M) during playback.
# You can also bookmark a disc by pressing and
holding EJECT at the point you wantto bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note thatyou can
only bookmark one discusing this method. To
clear the bookmark on a disc, press EJECT.
Selecting audio output
You can switch between stereo and monaural
audio output.
! This function is not possible when disc
playback has been stopped.
1 Touch A.MENU and FUNCTION and then
touch NEXT.
2 Touch L/R SELECT.
3 Touch L+R (left and right), L (left) and R
(right).
Note
Depending on the disc and the playbacklocation
on the disc, the icon
may be displayed, indicat-
ing that operating this function is not possible.
Playing DVD video discs
En
32
Section
06