Filter
Top Products
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P7650) is connected to this unit,
you can operate this function.
1 Touch A.MENU and INITIAL and then
touch DIGITAL ATT.
2 Touch
or to switch the digital at-
tenuator setting.
Touch
to select low setting and LOW ap-
pears in the display. Touch
to select high
setting and HIGH appears in the display.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
! The sound is turned off, MUTE or ATT is
displayed and no audio adjustment is pos-
sible.
! Operation returns to normal when the
phone connection is ended.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch TEL/GUIDE.
3 Touch
or to select any of the mut-
ing, attenuation or mixing.
Touch
or until the desired setting ap-
pears in the display.
! MUTE Muting
! ATT 20dB Attenuation (ATT 20dB has a
stronger effect than ATT 10dB)
! ATT 10dB Attenuation
Notes
! The sound is turned off, MUTE or ATT is dis-
played and no audio adjustment is possible.
! Operation returns to normal when thephone
connection or the voice guidance is ended.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch DVD DISC AUTO.
3 Touch a to turn automatic disc play-
back on.
# To turn automatic disc playback off, touch
b.
Switching the dimmer
setting for sub-display
To prevent the sub-display from being too
bright at night, the sub-display is automati-
cally dimmed when the cars headlights are
turned on. You can turn dimmer on or off.
Initial Settings
En
84
Section
16