Filter
Top Products
Black plate (103,1)
Troubleshooting
Common
Symptom Cause Action (See)
Power doesn’t turnon.
The unitdoesn’t operate.
Leads andconnectors areincor-
rectly connected.
Confirm oncemore thatall connectionsare
correct.
The fuseis blown. Rectify thereason forthe fuseblowing, then
replace thefuse. Bevery sureto installthe
correct fusewith thesame rating.
Noise andother factors arecausing
the built-inmicroprocessor tooper-
ate incorrectly.
PressRESET. (Page 11)
Playback isnot possible. The discis dirty. Clean disc.(Page 107)
The loadeddisc isa typethis unit
cannot play.
Check whattype thedisc is.
Non compatiblevideo systemdisc
is loaded.
Change toa disccompatible toyour video
system.
No soundsare heard.
The volumelevel willnot rise.
Cables arenot connectedcorrectly. Connect thecables correctly.
The unitis performingstill, slowmo-
tion orframe-by-frame playback.
There isno soundduring still,slow motionor
frame-by-frame playback.
There isno picture. The parkingbrake cordis notcon-
nected.
Connect aparking brakecord, andapply the
parking brake.
The parkingbrake isnot applied. Connect aparking brakecord, andapply the
parking brake.
The icon
is displayed, andop-
eration isnot possible.
The operationis prohibitedfor the
disc.
This operationis notpossible.
The operationis notcompatible
with thedisc’s organization.
This operationis notpossible.
The picturestops (pauses)and
the unitcannot beoperated.
Reading ofdata hasbecome impos-
sible duringplayback.
After pressingg once,start playbackonce
more.
There isno sound.
Volume levelis low.
The volumelevel islow. Adjust thevolume level.
The attenuatoris on. Turn theattenuator off.
There isaudio andvideo skip-
ping.
The unitis notfirmly secured. Secure theunit firmly.
The pictureis stretched,the as-
pect isincorrect.
The aspectsetting isincorrect for
the display.
Select theappropriate settingfor yourdisplay.
(Page 92)
When theignition switchis
turned ON(or turnedto ACC),
the motorsounds.
The unitis confirmingwhether a
disc isloaded ornot.
This isa normaloperation.
Nothing isdisplayed.
The touchpanel keyscannot be
used.
The rear viewcamera isnot con-
nected.
AV input2 isat incorrectsetting.
Connect arear view camera.
PressV.ADJ toreturn tothe sourcedisplay
and thenselect thecorrect settingfor AV
input 2. (Page 88)
<CRB2163-B>103
Additional Information
En
103
Appendix
Additional Information