Filter
Top Products
Introduction of advanced
CD operation
1
1 Function display
Shows the function names.
% Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Notes
! The dynamic range control is effective only on
Dolby Digital sounds. (Refer to page 43.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Touch A.MENU and FUNCTION and then
touch REPEAT.
2 Touch either of the following touch
panel keys to select the repeat range.
! DISC Repeat the current disc
! TRACK Repeat just the current track
Notes
! If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
! When playing discs with MP3 files and audio
data (CD-DA), repeat play performs within the
currently playing data type even if DISC is
selected.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Touch A.MENU and FUNCTION and then
touch RANDOM.
2 Touch a to turn random play on.
Tracks will play in a random order.
# To turn random play off, touch b.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Touch A.MENU and FUNCTION and then
touch SCAN.
Playing CDs
En
50
Section
09