Filter
Top Products
! The center speaker largely determines the
sound image and getting the balance right
isnt easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Touch A.MENU and AUDIO and then
touch PARAMETRIC EQ.
2 Touch C.EQ to select the equalizer.
Touch C.EQ repeatedly to switch between the
following equalizers:
SUPER BASS (S BASS)
POWERFUL (PWRFUL)NATURALVOCAL
FLATCUSTOM1CUSTOM2
CUSTOM3CUSTOM4
3 Touch POS to select the speaker to be
adjusted.
Each time you touch POS it selects speakers
in the following order:
FRONT (front speakers)REAR (rear speak-
ers)CENTER (center speaker)
# You cannot select speakers whose size is set
at OFF.
4 Touch BAND to select the equalizer
band to be adjusted.
Each time you touch BAND it selects equalizer
bands in the following order:
LOW (low)MID (mid)HIGH (high)
5 Touch c or d to select the center fre-
quency of selected band.
Touch c or d until the desired frequency ap-
pears in the display.
40506380100125160200
2503154005006308001k
1.25k1.6k2k2.5k3.15k4k5k
6.3k8k10k12.5k (Hz)
# You can select a center frequency from
among 20 frequencies for each band. You can
change the center frequency in 1/3-octave steps,
but you cannot select frequencies that have inter-
vals shorter than 1 octave among the center fre-
quencies of the three bands.
6 Touch a or b to adjust the equalizer
level.
Each time you touch a or b it increases or de-
creases the equalizer level. +12dB 12dB is
displayed as the level is increased or de-
creased.
7 Touch Q.Fac to select the desired Q fac-
tor.
Each time you touch Q.Fac it switches be-
tween the following Q factor:
WIDE (wide)NARROW (narrow)
# You can adjust parameters for each band of
the other speakers in the same way.
8 Touch ESC to return to the playback dis-
play.
Using the auto-equalizer
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to Auto TA and
EQ (auto-time alignment and auto-equalizing)
on page 81).
You can turn the auto-equalizer on or off.
1 Touch A.MENU and AUDIO and then
touch AUTO EQ.
# You cannot use this function if auto TA and
EQ has not been carried out.
2 Touch a to turn the auto-equalizer on.
# To turn auto-equalizer off, touch b.
Audio Adjustments
En
75
Section
15
Audio Adjustments