Filter
Top Products
! MANUAL – You have to press
OPEN/CLOSE to open/close the LCD
panel
Adjusting the LCD panel
slide position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
% Touch FLAP SET BACK on the setup
menu to turn the set back on.
The LCD panel slides to the back.
# Touch FLAP SET BACK again to turn the set
back off and the LCD panel slides to the front.
Setting the clock
Use these instructions to set the clock.
1 Touch CLOCK ADJUSTMENT on the
setup menu.
2 Touch 0 to 9 to set the clock.
# To cancel the inputted numbers, touch C.
3 Touch ENTER.
Note
Touching 24h/12h switches the clock display on
the sub-display between 12/24-hour formats.
Setting the video of rear
display
You can select either showing the same
source as the front display or showing the
video source on rear display independently.
! When selecting FRONT and the selected
source is an audio source, nothing is dis-
played on the rear display.
! When selecting FRONT, audio is not out-
putted from REAR DISPLAY OUT.
% Touch REAR MODE on the setup menu
to select the video on rear display.
Each time you touch REAR MODE it switches
between the following settings:
! FRONT – Display the same source as the
front display
! SEPARATE – Display the video source on
rear display independently of front dis-
play
Switching the dimmer
setting for sub-display
To prevent the sub-display from being too
bright at night, the sub-display is automati-
cally dimmed when the car’s headlights are
turned on. You can turn dimmer on or off.
% Touch SUB DISPLAY DIMMER on the
setup menu to turn dimmer on.
# To turn dimmer off, touch
SUB DISPLAY DIMMER again.
Adjusting the contrast for
the sub-display
Display contrast adjustment lets you adjust
the display for easier viewing when lighting
conditions change.
% Touch SUB DISPLAY CONTRAST on the
setup menu to switch the contrast setting.
Each time you touch
SUB DISPLAY CONTRAST it switches between
HIGH (high contrast) and LOW (low contras-
t).
Setup
En
102
Section
18