Filter
Top Products
! The adjusted speaker output level cannot be
stored by each listening position. This means,
memorizing a speaker output level for custom
setting overwrites the levels of all listening
positions.
Using the auto-equalizer
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 110.)
The auto-equalizer is the equalizer curve cre-
ated by auto TA and EQ (refer to Auto TA and
EQ (auto-time alignment and auto-equalizing)
on this page).
You can turn the auto-equalizer on or off.
1 Touch AUTO EQ on the sound setting
menu.
# You cannot use this function if auto TA and
EQ has not been carried out.
2 Touch ON to turn the auto-equalizer
on.
# To turn auto-equalizer off, touch OFF.
Storing the adjusted audio
settings in memory
You can store the adjusted audio settings in
this unit for later recall.
1 Touch MEMORY.
2 Touch any of CUSTOM1, CUSTOM2 or
CUSTOM3 to store the adjusted setting.
3 Touch YES to store the current setting
into the selected sound setting.
# To cancel the storage process, touch
CANCEL.
Editing the name of sound
settings
The name displayed for sound settings
(SETTING1, SETTING2 and SETTING3) can be
changed.
! Each name can be up to 10 characters
long.
1 Touch any of SETTING1, SETTING2 or
SETTING3 on the sound setting menu.
2 Touch NAME EDIT.
3 Touch the letter you wish to input.
Key What it does
Moves the cursor to the previous charac-
ter position.
Moves the cursor to the next character po-
sition.
Inputs the space.
ABC/123
Switches keypad between alphabet and
numeric.
Deletes letter by letter from the end of the
text.
4 Touch MEMORY to store the entered
name in memory.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
You can use this function only when
STANDARD has been selected. (Refer to
Switching the DSP setting mode on page 110.)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
Audio Adjustments
En
96
Section
17