Pioneer AVH-P7950DVD Car Video System User Manual


 
! The center speaker largely determines the
sound image and getting the balance right
isnt easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Touch ADJ. next to PARAMETRIC EQ on
the sound setting menu.
2 Touch LR Common/LR Independent to
switch the equalizer adjustment method.
! LR Common Adjusts left and right speak-
ers simultaneously.
! LR Independent Adjusts left and right
speakers separately.
3 Touch EQ to select the equalizer.
Touch EQ repeatedly to switch between the fol-
lowing equalizers:
POWERFULNATURALVOCALFLAT
CUSTOM1CUSTOM2CUSTOM3
LAST MEMORYSUPER BASS (S. BASS)
# You can also select the equalizer by using
EQUALIZER LIST.
# To close the equalizer curve list, touch CLOSE.
# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.
4 Touch or next to SPEAKER to select
the speaker to be adjusted.
Touch
or until the desired speaker appears
in the display.
FRONT LEFT (front left speaker)
FRONT RIGHT (front right speaker)
REAR LEFT (rear left speaker)REAR RIGHT
(rear right speaker)FRONT CENTER (front
center speaker)REAR CENTER (rear center
speaker)
# You can mute the selected speaker unit by
touching
. To cancel muting, touch .
# You cannot select speakers whose size is set
at OFF. (Refer to Customizing the speaker setting
on page 91.)
5 Touch BAND to select the equalizer
band to be adjusted.
Each time you touch BAND it selects equalizer
bands in the following order:
LOW (low)MID (mid)HIGH (high)
6 Touch
or to select the center fre-
quency of selected band.
Touch
or until the desired frequency ap-
pears in the display.
40506380100125160200
2503154005006308001k
1.25k1.6k2k2.5k3.15k4k5k
6.3k8k10k12.5k (Hz)
# You can select a center frequency from
among 20 frequencies for each band. You can
change the center frequency in 1/3-octave steps,
but you cannot select frequencies that have inter-
vals shorter than 1 octave among the center fre-
quencies of the three bands.
7 Touch or to adjust the equalizer
level.
Each time you touch
or it increases or
decreases the equalizer level. +12dB to 12dB
is displayed as the level is increased or de-
creased.
# When you adjust the speaker loudness with
selecting LR Common, the equalizer levels of
both side speakers are changed simultaneously.
Thus, if the equalizer level of one speaker is at
maximum or minimum, the level of the other
speaker is at full limit in opposite direction.
8 Touch Q.Fac to select the desired Q fac-
tor.
Each time you touch Q.Fac it switches be-
tween the following Q factor:
1.2 (wide)3.6 (narrow)
Audio Adjustments
En
89
Section
17
Audio Adjustments