Filter
Top Products
a Incoming call notice indication
Shows when an incoming call has been re-
ceived and not checked yet.
! Incoming call notice is not displayed for
calls made when your cellular phone is
disconnected from this unit.
b Voice recognition indicator
Shows when the voice recognition function
is on (for more details, refer to Voice recogni-
tion on the next page).
c Preset dial list display
Shows the Preset dial list.
% Touch the source icon and then touch
Telephone to select the telephone.
Notes
! The fader/balance setting (refer to Using bal-
ance adjustment on page 82) for the phone
source is set to FRONT 25 by default.
! Equalizer curve for the phone source is fixed.
When selecting the phone source, you cannot
operate the equalizer function. Refer to Recal-
ling equalizer curves on page 88.
Setting up for hands-free
phoning
Before you can use the hands-free phoning
function you will need to set up the unit for
use with your cellular phone. This entails es-
tablishing a Bluetooth wireless connection be-
tween this unit and your phone, registering
your phone with this unit, and adjusting the
volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
the next page.
# Your phone should now be temporarily con-
nected; however, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering connected cellular phone
on page 67.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
# Caller’s voice volume and ring volume may
vary depending on the type of cellular phones.
# If the difference between the ring volume and
caller’s voice volume is big, overall volume level
may become unstable.
# Before disconnecting cellular phone from this
unit, make sure to adjust the volume to proper
level. If the volume has been muted (zero level)
on your cellular phone, the volume level of your
cellular phone remains muted even after the cel-
lular phone is disconnected from this unit.
Basic operation of hands-
free phoning
Important
Advanced operations that require your attention
such as dialing numbers on the monitor, using
phone book, etc., are prohibited while you are
driving. When you need to use these advanced
operations, stop your vehicle in a safe place and
operate.
Bluetooth Telephone
En
65
Section
14
Bluetooth Telephone