Filter
Top Products
Power cable connection
Black (chassis ground)
Connect to a clean, paint-free metal location.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Fuse (10 A)
Fuse resistor
This product
IP-BUS input (Blue)
Antenna jack
IP-BUS cable
(sold separately)
Pioneer IP-BUS
accessories
(sold separately)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
En
46
Section
04
Connections
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Left Right
Front speaker Front speaker
Rear speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
Rear speaker
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
When you connect the separately sold
multi-channel processor (DEQ-P7650) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).
En
47
Section
04
Connections
Connections
<QRB3172-A/N>24