Pioneer F500BT Car Stereo System User Manual


 
= Be sure to keep this knob to lock position
in regular use. Otherwise, the navigation
system cannot boot up.
f USB connector (Mini-USB)
Use this port to connect an USB storage de-
vice with using the supplied USB cable.
Also you can connect an iPod (cable sold
separately, CD-IU200VM).
= For details, refer to Plugging and unplug-
ging a USB storage device on the next
page.
= For details, refer to Connecting your iPod
on page 14.
g AV input jack
To connect your iPod using a USB interface
cable for iPod (CD-IU200VM), connect it to
both this input jack and USB connector.
= Use the CD-RM10 (sold separately) to
connect the external video component.
h DC power jack
Use this jack only to connect with the AC
adapter.
Inserting and ejecting an
SD memory card
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Inserting an SD memory card
1 Open the cover.
2 Insert an SD memory card into the SD
card slot.
Insert it with the label facing in the same di-
rection as the LCD screen and press the card
until it clicks and completely locks.
Label side
3 Close the cover.
p There is no compatibility for Multi Media
Card (MMC).
p Compatibility with all SD memory card is
not guaranteed.
p Optimum performance of this unit may not
be obtained depending on the SD memory
card.
p Do not insert anything other than SD mem-
ory cards or dummy SD cards into the SD
card slot.
Ejecting an SD memory card
1 Open the cover.
2 Press the SD memory card until it clicks.
The SD memory card is ejected.
Basic operation
En
12
Chapter
02