Pioneer DVH-P7000 Car Stereo System User Manual


 
Audio Adjustments
En
57
Setting the sound focus equal-
izer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
FRT1 boosts the treble on the front output and
the bass on the rear output.
FRT2 boosts the treble and the bass on the front
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both FRT1 and FRT2 the H setting provides a
more pronounced effect than the L setting.
1 Press
SFEQ/SFC on the head unit to display
the
SFEQ
mode.
2 Press SFEQ/SFC on the head unit to select
the desired SFEQ mode.
FRT1-H (front1-high) —FRT1-L (front1-low) —
FRT2-H (front2-high) —FRT2-L (front2-low) —
CUSTOM (custom) —SFEQ OFF (off)
3 Press 1 or ¡ to select the desired
position.
Press 1 or ¡ until the desired position
appears in the display.
LEFT (left) —CENTER (center) —RIGHT (right)
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Notes
• If you adjust the bass or treble, CUSTOM
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
ence.
• If you switch the SFEQ mode, the H.P.F. func-
tion is automatically switched off. By switch-
ing the H.P.F. function on after selecting the
SFEQ mode, you can combine H.P.F. function
with SFEQ function.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press
A to select Fad.
Press
A until Fad appears in the display.
• If the balance setting has been previously
adjusted, Bal will be displayed.
• Pressing AUDIO on the head unit also per-
forms the same operation.
2 Press E or e to adjust front/rear
speaker balance.
Each press of E or e moves the front/rear
speaker balance towards the front or the rear.
Fad F15 Fad R15 is displayed as the front/rear
speaker balance moves from front to rear.
Fad F/R 0 is the proper setting when only two
speakers are used.
• When the rear output setting is Rear SP:S.W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 75.
• Pressing 5 or on the head unit also per-
forms the same operation.
3 Press 1 or ¡ to adjust left/right
speaker balance.
When you press 1 or ¡, Bal L/R 0 is dis-
played. Each press of 1 or ¡ moves the
left/right speaker balance towards the left or the
right.
Bal L9 Bal R9 is displayed as the left/right
speaker balance moves from left to right.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
English
Español
Deutsch
Français
Italiano
Nederlands
08
Section