Filter
Top Products
Additional Information
En
86
12
Section
Common problems (continued)
Symptom Cause Remedy
There’s no picture.
The prohibited mark “ ” is
displayed, and operation is
not possible.
The picture stops (pauses)
and the unit cannot be
operated.
There’s no sound.
Volume level is low.
There’s audio and video
skipping.
The picture is stretched, the
aspect is incorrect.
Rear display picture
disappears.
When the ignition switch is
turned ON (or turned to
ACC), the motor sounds.
The parking brake cord is not
connected.
The parking brake is not
applied.
The operation is prohibited for
the disc.
The operation is not compati-
ble with the disc’s organiza-
tion.
Reading of data has become
impossible during playback.
The volume level is low.
The attenuator is ON.
This unit is not firmly secured.
The aspect setting is incorrect
for the display.
The source disc being listened
to with the head unit has been
ejected.
This unit confirms whether a
disc is loaded or not.
Connect a parking brake cord, and apply
the parking brake.
Connect a parking brake cord, and apply
the parking brake.
This operation is not possible.
This operation is not possible.
After pressing 7 once, start playback
once more.
Raise the volume level.
Switch the attenuator OFF.
Secure this unit firmly.
Select the appropriate setting for your
display. (See page 69.)
Before ejecting the disc, switch the
source. This problem may occur when
certain connection methods are used.
This is a normal operation.