Filter
Top Products
Initial Settings
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
F to select WARN.
Press
F repeatedly until Warning appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select WARN on or off with E or e.
Pressing E or e will switch Warning between
on and off and that status will be displayed (e.g.,
Warning :ON).
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press F to select AUX.
Press F repeatedly until AUX appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select
AUX
on or off with E or e.
Pressing E or e will switch
AUX between on
and off and that status will be displayed (e.g.,
AUX :ON).
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press F to select DIM.
Press F repeatedly until Dimmer appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select DIM on or off with E or e.
Pressing E or e will switch Dimmer between
on and off and that status will be displayed (e.g.,
Dimmer :ON).
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Selecting the brightness
You can select the display brightness. Initially
this mode is set to 12.
1 Press F to select BRIGHT.
Press F repeatedly until Brightness appears in
the display.
• Pressing FUNCTION on the head unit also
performs the same operation.
En
74
10
Section