Filter
Top Products
To prevent injury, the unit must be securely attached to the wall
in accordance with the installation instructions provided with the
wall-mount kit.
High voltages are used in the operation of this set. Refer
service to qualified service personnel.
4. Press the STANDBY
4
button on the remote control to
turn on the display (or press the power
4 button at the
rear of the display).
1. Standby LED
The WP-42HD has a Standby LED to show there is power.
Switching into/from standby mode: The Standby mode is used for switching the
LCD monitor off for short periods of time. In standby mode the monitor is switched off
but is still receiving mains power.
To turn the monitor into standby mode, press the 4 button. The blue power
indicator illuminates more brightly.
To turn the monitor ON from standby mode, press any of the following
buttons: 4,
5 ,6 or 0 - 9 buttons.
Operation
Runco WP-42HD Owner’s Operating Manual
7
➤
Controls and indicators
WARNING
2
1