Filter
Top Products
Connect your PC to either PC-IN or RGBHV on the rear of the set. Then, select PC mode
or AV2 (RGBHV) via the TV/b button on your remote control. The set will become a
monitor for the PC.
By pressing the MENU button on the remote control a menu window will appear on
screen, this allows the settings to be adjusted.
To adjust the Picture settings select Picture using the
e or d buttons on the remote then
the 1 button to enter the following picture settings menu.
Press the
2
or
1
buttons to adjust the Picture brightness and the same to adjust
the contrast of the picture.
Position: Picture position changes the picture horizontally or vertically. Press the
1
button to enter the sub menus, adjustment is carried out using the
2
or
1
buttons on
the remote control.
Video Adjust: Video adjust changes the Phase and the clock of the screen. If the picture
is blurred or grainy this function will adjust it to a clearer picture, adjustment is carried out
using the
2
or
1
buttons on the remote control.
Auto Adjust: Auto Adjust will automatically adjust the picture by using the
1
button.
This will change all the above settings automatically.
Auto adjust can also be achieved by pressing the (recall) button on the remote
control without having to select the menu.
Resolution: Resolution displays the current resolution of the picture. This is for
information only and cannot be adjusted.
White Tone (R / G / B): Using the
2
or
1
buttons it is possible to adjust the colour
tone of the picture using the White Tone Red(R) / Green (G) / Blue(B). This will adjust the
picture to show more or less of the chosen colour. For example, if red is selected you can
adjust the proportion of red in the picture to increase or decrease using the
2
or
1
buttons.
Native Resolution: Native Resolution is used when the PC can output WXGA 1366 x
768. The setting on your Monitor set can be changed to receive XGA/WXGA signal using
the
2
or
1
buttons. Once the native resolution has been selected, save the settings
by switching the monitor off then on using the standby button.
Operation
Runco WP-42HD Owner’s Operating Manual
10
➤
Picture Menu (PC)
Picture
: Select
: Adjust
MENU
: Back
Brightness
Contrast
Position
Video Adjust
Auto Adjust
Resolution
White Tone R
White Tone G
White Tone B
1024 X 768 @60Hz
Native Resolution
XGA / WXGA 1366 x 768
Y
?