Filter
Top Products
Runco WP-42HD Owner’s Operating Manual vii
Doing so may cause a black shadow to appear on the screen, which will disappear when the screen temperature returns to
within the specification. This, of course, does not produce any harmful effect on the lifetime.
Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor. Use a damp cloth for cleaning.
This monitor must NOT be permanently mounted to the building structure. It must be mounted in such a way that it can be
removed using basic tools.
The power supply cord must NOT be attached to the building surface. The power supply cord must NOT be routed through
walls, ceiling, floors, or other similar openings in the building structure.
The power supply cord MUST be positioned so as to prevent physical damage.
THIS PRODUCT MUST BE EARTHED
This equipment is fitted with an approved, inline waterproof mains coupler and an approved, non-rewireable UK mains plug.
To change a fuse in this type of plug, proceed as follows:
1.Remove the fuse cover and fuse.
2.Fit a new fuse which should be a BS1362 13 Amp A.S.T.A. or BSI approved type.
3.Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the
mains plug contains a fuse, this should have a rating of 13 Amp. Ensure the fuse cover is correctly fitted. If a plug without a
fuse is used, the fuse at the distribution board should not be greater than 13 Amp.
The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13 Amp socket
elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue = Neutral; Brown = Live; Green and Yellow = Earth
1.The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
2.The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3.The Green and Yellow wire must be connected to the terminal which is marked with the letter “E” or coloured GREEN or
GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the
wires.
Do not attempt to bypass the safety purpose of the grounding type plug.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.
THE INSTALLER MUST MAKE SURE THE WATERPROOF INLINE COUPLER IS EASILY ACCESSIBLE.
ADDITIONAL FOR NORTH AMERICA AND CANADA:
IMPORTANT (UK only):