Filter
Top Products
INSTALLING THE RECEIVER
Follow steps A to C below. Your receiver will be ready to display digital programs on your
TV.
STEP A: CONNECTIONS
DO NOT PLUG THE RECEIVER INTO THE MAINS YET.
Before you use this receiver, it is necessary to connect it to your TV.
1. CONNECTING TO TV
1-1. Connection to Antenna
Disconnect the antenna cable from your TV and connect it to the “ANT.IN” terminal on the back of
the receiver.
1-2. “RF OUT” Connection to TV or VCR
This “RF OUT” provides you a RF loop-through function to receive analogue TV programs as well as
digital programs. Use an RF coaxial cable (not supplied) to connect the HD-S25 “RF OUT” terminal to
TV’s or VCR’s antenna input.
Before connecting or disconnecting the antenna cable, turn off the receiver and
antenna booster, if any.
HD-S25
RF coaxial cable
(not supplied)
To TV antenna input
Antenna cable
(not supplied)
AUX INPUT
Y
P
B
P
R
L
R
ANT. IN
RF OUT
1-3. Connections to TV – Video Connection
In the accessory box, you will find two sets of cables: One is the component video cable (with red, green
and blue connectors) and the other is the Audio/Video cable (with yellow, white and red connectors).
For better video quality, we recommend that you use the Mini D-Sub 15-pin cable or the RGBHV video
cable (with 5 RCA connectors). Both of these cables are not included in the HD-S25 package.
You have 5 choices for connecting the video output from the receiver to your TV. Use only one of the
following connections (with (a) or (b) being the best choice):
(a) Mini D-Sub 15-pin connection: If your TV has a RGB Mini D-Sub 15-pin video input
12