Filter
Top Products
STARTUP GUIDANCE
batteries only in accordance with local ordinances.
z Do not leave dead or exhausted batteries in the remote control.
z Do not use different types of batteries together, or mix old and new batteries.
z If you do not use the remote control for a long period of time, remove the batteries to avoid
possible damage from battery corrosion.
z If the remote control does not function correctly or if the operating range becomes reduced,
replace all batteries with new ones.
z If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new
batteries.
Operating with the remote control
30
O
30
O
Within about 5m
1. Point the remote control at the remote sensor and
press the buttons.
2. Distance: About 5 m from the front of the remote
sensor.
3. Angle: About 30q in each direction of the front of the
remote sensor.
z Do not expose the remote sensor of the receiver to a strong light source such as direct sunlight or
other illumination. If you do so, you may not be able to operate the receiver via the remote control.
z Do not drop or give the remote control a shock.
z Do not leave the remote control near an extremely hot or humid place.
z Do not spill water or put anything wet on the remote control.
z Do not disassemble the remote control.
19