Filter
Top Products
MENU NAVIGATION
x
x
x
x
x
Now click on the “Send” button on your PC
HyperTerminal to start uploading the new
software.
On the TV screen, you will see the window
with a status bar indicating the download
progress.
When download is completed, the receiver
will reboot automatically. You can now exit
HyperTerminal.
After the receiver is booted up, you will see a
message window informing you that the
receiver’s database is empty. Note that the
password will also be reset to the default
“0000”. Now press the “MENU” button and
select your region of residence.
On the Main Menu, select “PROFILE” and
then “INFORMATION” to confirm the current
software is indeed changed to the new one.
You can then proceed to tune your receiver
by following “INSTALLATION” instructions on
page 25.
Note: It is safe to turn off the receiver only after the
receiver has booted up automatically.
Please
do not disconnect the receiver from
the power source during the software update
process. If there is a power failure during
this time, the receiver may become
unusable. In this case, please contact your
local dealer.
29