Filter
Top Products
2. CONNECTING TO DVD PLAYER
In case you have a DVD player with component video outputs, but your TV has only one set of
component video inputs, you may follow the AUX (refer to page 43 for explanation of AUX) connection
described below to achieve a good video performance.
Set the MODE-Switch (refer to page 8) to YP
B
P
R
, and then use a component video cable to connect
from the DVD’s YP
B
P
R
output to the HD-S25 “AUX INPUT” YP
B
P
R
connectors; Use an Audio/Video
cable to connect the audio connectors from DVD’s audio output to the HD-S25 “AUX INPUT” L/R: red to
red (right audio) and white to white (left audio).
SD OUTPUT
S-VIDEO
L
R
L
R
VIDEO
HD OUTPUT
RGB
YP P
BR
MODE
Y /G
P
B
/B
P
R
/R
HD
VD
RGB
DIGITAL
(COAXIAL)
(OPTICAL)
AUDIO
AUX INPUT
Y
P
B
P
R
L
R
Component video cable
(supplied)
Audio/Video cable
(supplied)
DVD Player
To DVD audio outputs
To DVD Y/P
B/PR video outputs
HD-S25
Y
PB
PR
Y
P
B
PR
white
red
white
red
Match the
colors when
connecting
Note:
1. If you use an HD-ready TV while the HD input of your TV cannot
support SD video
format, please connect your DVD player directly to your TV via the SD video input.
2. If you want to use this AUX connection, you must
follow the steps below to connect the
HD-S25 receiver to TV:
x Prepare another component video cable and use Video Connection (c) YP
B
P
R
on
page 14.
x Prepare another Audio/Video cable and use Audio Connection on page 15.
3. There is no video format conversion in AUX mode.
16