Filter
Top Products
DSM 132/132RS Receiver User Guide 33
Installing the Receiver 3
Plug the:
• right-angle connector into the receiver
• straight 9-pin connector into the external device (such as a PC
running HYDROpro software).
When routing the cable from the receiver to the external device, avoid
the hazards listed on page 31.
When the cable is safely routed and connected to the receiver, use
tie-wraps to secure it at several points, particularly near the base of the
receiver to prevent straining the connection. Coil any slack cable,
secure it with a tie-wrap, and tuck it into a safe place.