Filter
Top Products
6 Activating Firmware Options
82 DSM 132/132RS Receiver User Guide
6.1 Introduction
This chapter describes how to activate and use the firmware options
that you can purchase with the DSM 132 receiver (see Table 6.8).
For more information, see Receiver enhancements, page 17.
6.2 Installing an Option
To install and activate an option, use one of the following methods:
• Enter a password
• Use Flashloader100
62.1 Enter a password
When you purchase an option, your Trimble Reseller provides the
necessary password. Once entered, the password is stored in
permanent memory and remains even when the receiver is switched
off.
Use the Update receiver screen of the DSM 132 menu system to enter
the password directly into the receiver and activate the option for
immediate field use.
1. If you are using AgRemote, connect the receiver to an office
computer.
2. Navigate to the Update receiver screen. Press 4.
The active cursor highlights the first digit.
Table 6.8 Firmware options
Part Number Option
36429-30 Differential Base Station
36429-20 EVEREST Multipath Rejection
36429-50 RTS/CTS Flow Control Negotiation