Filter
Top Products
DSM 132/132RS Receiver User Guide 77
Configuring the Receiver 5
–Press 1 or 2 to reject the new reference position. Press
4 to finish.
50.1 Edit base position
Set the receiver antenna to a particular location. Do this when the
antenna is on a surveyed location with known coordinates:
1. Navigate to the Base Location screen.
2. Press 3 to activate the cursor.
3. Press 1 or 2 until Edit Base Pos is displayed.
4. Press 4. The receiver displays three screens in succession,
showing the current latitude, longitude, and altitude:
– To save the current coordinate value, press 4.
– To change the reference coordinate value, press 1 or 2.
Press 3 to move between characters. Press 4 to save the
changes.
5. Once you press 4 to accept the altitude, the receiver asks
whether or you want to accept the new reference position or not:
–Press 4 to accept the new reference position.
–Press 1 or 2 to reject the new reference position. Press
4 to finish.
50.1 Set from averaged positions
To determine the location of the receiver antenna, you can configure
the receiver to average the computed position over a period of time:
1. Navigate to the Base Location screen.
2. Press 3 to activate the cursor.
3. Press 1 or 2 until Set From Ave is displayed.
4. Press 3 to move the cursor to the right.