Filter
Top Products
5 Configuring the Receiver
70 DSM 132/132RS Receiver User Guide
3. Once activation succeeds, the Home screen displays D/3D:
5.1 Configuring Beacon DGPS
DSM 132 receivers are configured by default to use WAAS/EGNOS
in Auto Range DGPS mode. To change a DSM 132 receiver to
Satellite DGPS mode, see page 66.
Select the frequency of the channels to be used when receiving RTCM
SC-104 broadcasts from radiobeacons:
1. Navigate to the DGPS Source screen.
2. If the screen does not display Beacon Only, press 3 to select
the Data Source field. Then press 2 until Beacon Only
appears.
3. Press 4 to save the changes.
4. Press 2 until the Beacon Mode screen appears:
D/3D í07 DOP03
WAAS 122 ÷ø04