A SERVICE OF

logo

Printer requirements and specifications
Installation Planning Guide 6-25
NOTE: These turning figures are based on inverter/feeder/
stacker dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9
cm.
Printer hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your printer hardware components.
Table 6-11. Printer specifications and power requirements
Device
Dimensions (width,
depth, height)
Total
Weight Heat dissipation Power requirements
Printer with
inverter
feeder/stacker
and one
feeder/stacker
W=151.2 in / 384 cm
H=59.6 in / 151.3 cm
D=38.8 in / 98.6 cm
Total space required
(+ access):
223.25 in W by 114 in
D / 567 cm W by
290.3 cm D
2,588 lbs/
1,174.9
kg.
DP 100, 115, and
135:
Operating:
28,140 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
DP 155 and 180:
Operating:
32,770 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
60 Hz:
DP 100, 115, and
135:
120/240 VAC or
120/208 VAC;
50 amp service;
NEMA L14-50R;
KVA 7.3 (operating)
DP 155 and 180:
120/208 VAC
(182 V to 220 V),
KVA 7.3 (operating)
Cord 1: 50 amp,
NEMA 14-50R
Cord 2: 30 amp,
NEMA 14-30R
50 Hz:
Consult your local
service representative.