A SERVICE OF

logo

Printer requirements and specifications
6-26 Installation Planning Guide
Printer with
inverter
feeder/stacker
and two
feeder/
stackers
W=183.5 in / 466.1
cm
H=59.6. in / 151.3 cm
D=38.8 in / 98.6 cm
Total space required
(+ access):
256.5 in W by 114 in
D /
648.9 cm W by 290.3
cm D
3,109 lbs /
1,411.9 kg
DP 135:
Operating:
28,140 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
DP 155 and 180:
Operating:
32,770 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
60 Hz:
DP 135:
120/240 VAC or
120/208 VAC;
50 amp service;
NEMA 14-50R,
KVA 8.1(operating)
DP 155 and 180:
120/208 VAC
(182 V to 220 V),
KVA 8.1(operating)
Cord 1: 50 amp,
NEMA 14-50R
Cord 2: 30 amp,
NEMA 14-30R
50 Hz:
Consult your local
service representative
Printer with
inverter
feeder/stacker
and three
feeder/
stackers
W=216 in / 730.8 cm
H=59.6 in / 151.3 cm
D=38.8 in / 98.6 cm
Total space required
(+ access):
288 in W by 114 in D /
730.8 cm W by 290.3
cm D
3,630 lbs /
1,648.9 kg
DP 135:
Operating:
28,140 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
DP 155 and 180:
Operating:
32,770 BTU per hr
Standby:
4,454 BTU per hr
Energy Saver:
2,700 BTU per hr
60 Hz:
DP 135:
120/240 VAC or
120/208 VAC;
50 amp service;
NEMA 14-50R,
KVA 8.1(operating)
DP 155 and 180:
120/208 VAC
(182 V to 220 V),
KVA 8.1(operating)
Cord 1: 50 amp,
NEMA 14-50R
Cord 2: 30 amp,
NEMA 14-30R
50 Hz:
Consult your local
service representative
Bypass
transport
W=20.4 in / 51.9 cm
H=56.1 in / 142.5 cm
D=28.3 in / 71.9 cm
176 lbs /
80 kg
--- ---
Table 6-11. Printer specifications and power requirements (Continued)
Device
Dimensions (width,
depth, height)
Total
Weight Heat dissipation Power requirements