Installation Planning Guide 7-1
7. System connections
This chapter provides cable requirements for your Xerox
DocuPrint 100/115/135/155/180 EPS. It also provides
information about channel-attaching your printer. To ensure all of
your cable requirements are met, work with your Xerox
representative.
Cable lengths
Cable lengths are important considerations in planning your
layout, as components can be separated only up to the length of
the data interface cables that connect them.
Cables supplied with the printer are long enough to meet the
needs of most installations. Some of these cables are specific
lengths to conform to engineering and safety standards.
Interface cable The printer and controller can be separated up to the length of
the interface cables that connect them. The printer and controller
are connected by a 20 foot / 6.1 meter cable, or an optional 50
foot / 15.2 meter cable.
Power cables The printing system power cable lengths are as follows:
Table 7-1. Power cable lengths
Power cable Length
Controller 8 feet / 2.4 m
Printer 15 feet / 4.5 m
