Filter
Top Products
13-EN
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press SOURCE/ to turn on the unit.
• The unit can be turned on by pressing any button on the unit except
(Eject).
• When the security code is set, you have to input the password when
the system is connected to a battery and turned on for the first time.
For details, refer to
“Setting Security code” on page 38.
2
Press and hold SOURCE/ for at least 3 seconds to
turn off the unit.
Adjusting the Volume
Adjust the volume by turning the Rotary encoder.
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level by 20 dB.
Press Rotary encoder (MUTE).
The audio level decreases by about 20 dB.
Pressing Rotary encoder (MUTE) again brings the audio back to
its previous level.
How to view the Display
• To protect the display, touch the onscreen button with the tip of your
finger.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• If you touch two buttons at the same time, a malfunction may occur.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press SOURCE/ .
The SOURCE selection screen is displayed.
Display example for SOURCE selection screen
Changes the item of source selection list. (Depending
on the source quantity, this button may not be
displayed.)
Displays the source modes that can be selected.
[ ] button: Changes to Navigation screen.
(Available only when ON is set in “Setting the Navigation
Mode” (page 40) and “Navi” is set in “Setting the
VISUAL Button” on page 35).
[V.Sel] button: Changes to VISUAL selection screen.
(When V.Sel is set in
“Setting the VISUAL Button” on
page 35.)
Changes to SETUP main screen.
Changes to Navigation main screen. (When “ON” is set
in “Setting the Navigation Mode” (page 40).)
Changes to the Telephone Menu screen.
(When “BLUETOOTH IN” is set to other than OFF
(
page 41).)
Displays the rear view video.
(When an optional rearview camera is connected and
Camera IN is set to ON (
page 39).)
Turns off the Source Select screen, and returns to
previous source screen.
Changes to the Rear selection screen when “Setting the
Picture/Sound Output” (page 41) is set to ON.
Returns to the previous screen.
• The kind of source modes that are displayed varies depending on
connection and setting
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio Mode screen.
TOUCH PANEL operation
Onscreen buttons are expressed as follows in this Owner’s
Manual.
• Onscreen buttons are shown in bold, enclosed in [ ] (e.g.
[BAND]).
Recalling the Source